Silage shear grab type KHXL

The Flingk KHXL is a unique silage shear grab. Due to the large grab height and small grab depth, more often the front wall of the silage pit gets refreshed, making the silage less susceptible for decay. Another advantage is that the shear grab doesn’t have to be pushed far into the silage. Due to the short lower blade, the shear grab unloads easily, for example into the mixer wagon, and does not need to be tipped far to empty it. It will more gradually release the silage into the mixer wagon. Because of the fact that the cylinders are mounted inside the bucket, it is possible to grab at the side of the silage pit, which will reduce the amount of feed residues. The special knives cut smoothly through your pit, resulting in a tight cut. This also causes less strain on the shear grab and on your front loader, shovel or telehandler.

The inside of the bucket has a round shape. In combination with the short lower blade, this ensures that the silage easily slides out of the bucket. The advantage of this is that the silage grab does not have to be tilted far during the release. The shear grab can easily be pushed into the silage because of the sharp lower blade. The bevel is placed at the bottom. As a result, the sharp edge of the knife is clear of the ground, which prevents damage.

The self-sharpening blades have a fine toothing and are made from high-alloy tool steel. This keeps the blades sharp for a long time and requires less force during cutting. This results in a tight silage pit wall.

Because the bucket is short, the weight is compact on the shovel. The pivot points are behind the quick coupler, so that the center of gravity is advantageously placed. This reduces the forces on the driving machine.

Because the shear grab cuts with a large height and a small depth, the silage wall is often refreshed and a large volume can always be loaded. The thin slices allow fine dosing in the mixing wagon.